So right now building quadcopters/drones are a big thing. It can be used to race other people, film your next big movie or even just to fly around for fun.
But where do you begin. Your probably thinking "I've looked online and gosh its over $1000 to get one! and I don't know how to make one"
Well good thing you stumble here because today we are going to get all the parts you need to make your own.
I found all my parts that I needed on Amazon.com. Its so great you can find anything there and find the best price you need. So lets start
Shopping Cart:
- FLYsky FS-T6 transmitter
- Quadcopter frame kit
- 6045 Props (because your going break them, it happens)
- 1300mAh 3S 20C Lipo Pack
- XT60 Connector
- Tenergy 1-4 Cells Charger
- Servo extension wire cable
- 3.5mm Male and Female connectors
- Soldering Iron (if you don't have one)
- Velcro strips to hold the battery down and your flight controller
- Zip Ties
I do recommend you get the KK2.15 multi-rotor flight controller, Its easy to use and you don't need a computer to make any adjustments. Its an all in one system and can get you out and flying sooner.
With all the links above your total cost will come out to be $232.89, a small price to pay to get you started and building your own multi-rotor.
Remember you don't need to buy exactly what I have but these are recommendations that will help you to start some where.
Hope you enjoyed this post and if you liked please comment bellow and follow me. If you have any other recommendations on what to start or if you liked another post on RC Models let me know
No comments:
Post a Comment